Ben Aipa


Posted on Jan 21st, 2010 by Mark in Bugg's Boards, Collections, Featured Boards. 1 Comment

Ben Aipa Header
AipaThere are few aspects of surf culture that Ben Aipa hasn’t touched. At the peak of his physical talents during the 1960s and 1970s, Aipa was a ferocious competitor and powerful free surf presence in every lineup he entered. Then, after establishing Aipa Surfboards in 1970, the Honolulu native also became one of the most innovative board designers in history. He is credited with the invention of both the swallowtail and stinger design variations, a series of tail-rail-fin breakthroughs that helped feed the dynamic performances of rising stars like Michael Ho, Larry Bertlemann, Buttons Kaluhiokalani, and Mark Liddell. In the wake of these innovations, Aipa quickly established a reputation as a go-to shaper for boards that could enhance the low-slung and aggressive style that soon became the vanguard of performance during that era. Afterward, he also contributed heavily to the development of the modern longboard. In the years since, Aipa has continued to compete—winning several Legends and Grandmasters championships at a national level—and has served as a trainer and mentor for surfers such as Brad Gerlach, Sunny Garcia, and Bruce and Andy Irons. He’s also continued to shape. Seven years ago Ben teamed up with Boardworks Surf to develop his line of molded epoxy sandwich surfboards. His models designed specifically for the bigger guys have been very popular and have a loyal following. “It’s an advantageous material and design because of the lighter cores and stronger decks,” he says. “There’s better flotation and less swing weight at the nose and tail.”

www.benaipa.com

KEY: O= Original, R= Repaired, RF= Refurbished.  Condition of board rated: 1(worst)-10(best)

bal68w2012t314_deckbottom

bal68w2012t314_collage

Board Dimensions

Length: 

Width: 

Thickness:


bal68w2012t318_deckbottom

bal68w2012t318_collagebal68w2012t318_04bal68w2012t318_02

Board Dimensions

Length: 

Width: 

Thickness:


bal69w2058t238_deckbottom

bal69w2058t238_collagebal69w2058t23804bal69w2058t23802

Board Dimensions

Length: 6′ 9″ 

Width: 20″ 5/8 

Thickness: 2″ 3/8

Shaped in the 1980’s, this squash square tail was signed under the glass by Aipa himself. Many shapers during this era incorporated the signature under the glass of their hand shaped boards. Also around the time this board was shaped, Aipa began experimenting with concave and v-bottom shapes. Most of his 80’s shapes were around 2.5 inches thick or more! O, R – 7/10 


bal76w2018t278_deckbottom

bal76w2018t27802

Board Dimensions

Length: 7′ 6″ 

Width: 20″ 1/8 

Thickness: 2″ 7/8

This diamond tail was shaped in the early 1970’s. Right away the artsy deck splash made this board a favorite. The board is thicker towards the front, which was typical trait of design in this era. The strong purple color covers the bottom and wraps the rails. The purple meets a yellow resin pinline on top. A vibrant tint splash covers the top from nose to tail. O, RF – 6/10



bal68w2012t314_04bal68w2012t314_02

Board Dimensions

Length: 

Width: 

Thickness:


bal67w2014t258_frontback


Board Dimensions

Length: 6′ 7″ 

Width: 20″ 1/4 

Thickness: 2″ 5/8

This pintail was shaped in the late 1970’s. Aipa designed this board with experimental edged rails reflecting the progress of design leading into the 1980’s. This classic 2 tone color scheme with inlayed pinlines became popular in the 1980’s. O,RF – 8.5/10


bal53w2034t214_frontback

bal53w2034t214_collagebal53w2034t21404bal53w2034t21402

Board Dimensions

Length: 5′ 3″ 

Width: 20″3/4 

Thickness: 2″ 1/4

This winged swallow tail kneeboard was shaped in the late 1970’s. Aipa rarely shaped kneeboards in his hay day, but designed this one with a wide dished out deck for ample knee room. The colored resin pattern and tint makes this board pop. If you look at this template closely, we have come full circle. O – 8/10


bal611w2014t214_deckbottom

bal611w2014t214_collagebal611w2014t21404bal611w2014t21402

Board Dimensions

Length: 

Width: 

Thickness:



bal67w2014t258_collagebal67w2014t25804bal67w2014t25802

Board Dimensions

Length: 6′ 7″ 

Width: 20″ 1/4 

Thickness: 2″ 5/8

This pintail was shaped in the late 1970’s. Aipa designed this board with experimental edged rails reflecting the progress of design leading into the 1980’s. This classic 2 tone color scheme with inlayed pinlines became popular in the 1980’s. O,RF – 8.5/10



Related Articles Union >> Bradshaw >> Robert August >> Catri >> Tom Carroll >>




Recent Blog Posts

Check out some of the lastest updates from Buggs and blog posts here.

Surfboard collector Mark “Buggs” Arico discusses a few of his prized possessions on Surfermag.com

“It all started with one of Tom Curren’s boards. I was picking up some boards for a surf trip and saw it at my...

Tony Anjo
Tony Anjo Shaper of Lightning Bolt 1970’s

Tony Anjo was one of the Lightning Bolt shapers of the 70’s, who...

Petrillo

BACK TO BUGGS’ GALLERY

PETRILLO

“When I first started working here around 1967, I was sitting on the floor playing...

css.php