Length: 8′ 0″
Width: 19″ 1/2
Thickness: 2″ 5/8

Another Pipeline classic handshaped replica Lopez finished in 2000. Signed by Gerry Lopez. This design was the first template Gerry created specifically for Pipeline. If he is still shaping them today, it proves that this template is a winner!

O -10/10

Length: 7′ 5″
Width: 19″ 1/4
Thickness: 2″ 3/4

The era has died but the shape will live on. This is a handshaped board recreated in 2000 to replicate Lopez’s signature Pipeline gun. Signed by Gerry Lopez. Taken out of the collection of Billabong’s Paul Naude.

O – 10/10

Length: 7′ 4″
Width: 19″ 3/4
Thickness: 2″ 3/4

This is a diamond tail, mini-gun, handshaped in the mid 1970’s. The top has an intriquite black pinline outlining the rails with a red tint wrapping the rails from bottom to top. This is a board with a lot of volume and a flatter design.

O – 8/10

This stinger, swallow tail, single fin shape was made in the early 1970’s for Lightning Bolt. The strong red resin color makes the large lightning bolt logo pop on the top as well as the large white logo on bottom. This board has soft rails throughout with a flat bottom and no vee.

O – 6/10

Length: 7′ 2″
Width: 19″ 1/2
Thickness: 2″ 5/8

This is a model from the mid 1970’s. It is a handshaped diamond tail design with the trademark thick, bold lightning bolt logo overlaid with white pinlines. The shape does not have much vee in the bottom and has no concave. The nose rocker is flat and suttle as the soft rails taper gradually.

O – 8/10

Length: 7′ 1″
Width: 19″ 3/4
Thickness: 2″ 7/8

This is a 1978 diamond tail handshaped design. This board has a simple design with a lot of volume in the mid-upper section of the board. There is a slight blue tint accompanying the many lightning bolt logos of various sizes on top and bottom.

O -8/10

This old Hansen thumbtail surfboard was shaped by Gerry in the 1960’s. A very well preserved shape, this rare item shimmers with a bright green deck and rails. This is an all original from an era that will never be forgotten.

O – 8/10

A rare board from the 1970’s, this Lopez pintail was serial number 150. It has the very original Lightning Bolt laminate, as well as Gerry’s signature bolt laminate. The very yellow deck has a thin orange pinline outlining the rails. This board was shaped for Pipeline with the trademark narrow design.

O – 7/10

Length: 6′ 11″
Width: 19″ 1/2
Thickness: 2″ 1/4

This board is an older, rare handshaped piece for Lightning Bolt, Maui. The top is tinted with a dull yellow which meets a thin white pinline that outlines the rails. The bottom is covered with a bold orange which slightly wraps the rails to the front, and has thick black pinlines outlining the rails from nose to tail. This is a unique board and is also signed by Lopez.

O, RF – 9/10

Length: 6′ 9″
Width: 19″ 3/4
Thickness: 2″ 3/8

This board was shaped in 1978 and is a good example of a typical model that was ridden by Gerry himself. A classic Pipeline design, this shape has traits of a knifey, pulled in, mini gun. The green tint on bottom slightly wraps the rails meeting a thin black pinline on top. There is no evidence of any sort of leash plug, a common design when Lopez knew the board would be ridden at big Pipe.

O – 8/10

Length: 6′ 7″
Width: 20″ 1/8
Thickness: 2″ 3/8

This 1979 swallow tail single fin was shaped during the experimental shortboard revolution. The classic thick, bold lightning bolt logo is slapped on the slightly weathered deck. The swallow tail design was a popular small wave board in the late 70’s. This board has a slight vee bottom and little to no concave.

O,R – 6/10

This is the oldest shape in the Lopez set, it is a late 1960’s Gerry Lopez diamond tail design for Hansen Surfboards. This shape was commonly made during the start of the short board revolution. The top is clear resin with a tear drop tint of yellow and green inlayed with a blue pinline. It has a very flat bottom with no vee, and the rails start soft at top and taper into hard edged rails. The deck is thick and semi domed.

O – 8/10

Length: 6′ 5″
Width: 19″ 1/2
Thickness: 3″

A clean stinger swallow tail, Lopez hand shaped this design in 1980. A board created over 20 years ago, however it was rarely ridden. The large red bolt on top is outlined in a thin black pinline and this board is signed by Lopez on the bottom. It is a great new shape and template for the era.

O – 8/10

Length: 6′ 3″
Width: 19″
Thickness: 2″ 3/8

This is a beautiful original, hand shaped, diamond tail single fin that Lopez shaped in the mid 1970’s. Vibrant green and orange contrast the thick black pinlines outlining the board. It has soft rails, a slight vee bottom and nose rocker. Timeless Lopez signature under the glass with double large lighting bolts on front and back. A true piece of history.

O, R – 8/10